Reflex CES · 3U VPX boards
AV145 Zynq UltraScale+ RFSoC Gen3
3U OpenVPX board with an AMD RFSoC Gen3 ZU47DR, eight 5 Gsps ADCs and eight 9.85 Gsps DACs.
- RFSoC Gen3 ZU47DR
- 8x 5 Gsps ADC
- 8x 9.85 Gsps DAC
- Up to 1 TB NVMe
- 3U OpenVPX

Overview
The AV145 is a 3U OpenVPX board based on the AMD Zynq UltraScale+ RFSoC Gen 3 XCZU47DR, which integrates RF data converters, FPGA logic and Arm cores. It provides eight 14-bit ADCs at up to 5 Gsps and eight 14-bit DACs at up to 9.85 Gsps, with DDR4 memory and an onboard NVMe SSD. It comes in air-cooled and conduction-cooled versions for electronic warfare, wideband radar, MIMO and wideband communication.
Built for
- Electronic warfare, ESM and ECM
- Wideband radar transmit and receive
- MIMO systems
- Wideband communication
Key features
RFSoC Gen 3
The XCZU47DR combines RF ADCs and DACs, FPGA logic and four Arm Cortex-A53 cores.
High-resolution converters
Eight 14-bit ADCs at 5 Gsps and eight 14-bit DACs at 9.85 Gsps on front-panel SMPM connectors.
DSP capacity
930K logic cells and 4,272 DSP slices give more than 5.5 TMACs.
Onboard storage
A 512 GB or 1 TB NVMe SSD sits on the processor's PCIe interface.
Flexible clocking
A 100 MHz internal reference feeds two synthesisers, or an external 10 to 200 MHz reference can be used.
Ruggedisation options
Air-cooled EAC4/EAC6 and conduction-cooled ECC3/ECC4 versions are offered.
Specifications
- RFSoC
- AMD Zynq UltraScale+ RFSoC Gen 3 XCZU47DR
- Logic and DSP
- 930K logic cells, 4,272 DSP48 slices, 38 Mbit block RAM, 22.5 Mbit UltraRAM
- Processor
- 4x Arm Cortex-A53 at 1333 MHz
- ADC
- 8 channels, 14-bit, up to 5 Gsps
- DAC
- 8 channels, 14-bit, up to 9.85 Gsps
- Analogue I/O
- AC coupled, 10 MHz to over 6 GHz, SMPM, 50 Ohm
- Clock
- 100 MHz internal reference, two synthesisers 500 MHz to 10 GHz, external ref 10 to 200 MHz
- Memory
- 512M64 DDR4-2400 SDRAM, up to 1G64
- Storage
- 512 GB or 1 TB NVMe SSD, 2x 2 Gbit QSPI flash
- VPX interface
- OpenVPX VITA 65: two data plane fat pipes, GbE, UART, USB 2.0, 18 LVDS pairs on P2
- Transceiver protocols
- Aurora, GbE, PCIe Gen 1 to 3, SATA, SRIO, XAUI, up to 25.785 Gbps
- Cooling
- Air cooled (EAC4, EAC6) or conduction cooled (ECC3, ECC4)
- Operating temp
- 0 to 55 C (air standard) up to -40 to 85 C card edge (conduction rugged)
- Power
- 78 W max on +12 V
- Weight
- 550 g air cooled, 650 g conduction cooled
Models and options
- AV145-AS-1: air cooled standard (VITA 47 EAC4)
- AV145-AR-1: air cooled rugged (EAC6)
- AV145-CS-1: conduction cooled standard (ECC3)
- AV145-CR-1: conduction cooled rugged (ECC4)
Specifications as published by Reflex CES. Configurations vary by model; we will confirm the exact build with your quote.
More in 3u vpx boards
All Reflex CES products
AV155 Versal RF
SOSA aligned 3U VPX board with an AMD Versal RF device, 32 Gsps ADCs and 16 Gsps DACs.
- Versal RF VR1652/VR1952
- 32 Gsps ADCs
- 18 GHz bandwidth
- SOSA aligned
- 3U VPX

AV153 Agilex 9 Direct RF
SOSA aligned 3U VPX board with an Agilex 9 Direct-RF SoC FPGA and eight 64 Gsps ADC and DAC channels.
- Agilex 9 Direct RF
- 8x 64 Gsps ADC/DAC
- 20 GHz bandwidth
- SOSA aligned
- 3U VPX

AV150 Virtex UltraScale+
3U OpenVPX board pairing four 3 Gsps ADCs and four 16-bit DACs with a Virtex UltraScale+ VU7P, VU9P or VU13P.
- VU7P / VU9P / VU13P
- 4x 3 Gsps ADC
- 4x 16-bit DAC
- 2x DDR4 banks
- 3U OpenVPX
Need help choosing?
Tell us your application. We will recommend the right Reflex CES product, quote it and support it after delivery.