Reflex CES · PCIe boards
XpressGXA10-LP1151B
Low-profile Arria 10 GX 1150 PCIe board with a QSFP+ cage for 10/40 GbE, 8 GB DDR4 and a BMC.
- Arria 10 GX 1150
- PCIe Gen3 x8
- QSFP+ 40 GbE
- 8 GB DDR4
- Low profile
Overview
The XpressGXA10-LP1151B is a low-profile PCIe network processing board based on an Intel Arria 10 GX 1150 KLE FPGA. It has a QSFP+ cage for 10 and 40 GbE, 8 GB of ECC DDR4 and a board management controller, and fits a single slot with a passive heatsink. Target applications are fog computing, finance, acceleration, networking and security.
Built for
- Fog and edge computing
- Finance and ultra-low latency
- Networking and security
- Hardware acceleration
Key features
Arria 10 GX 1150
The 20 nm FPGA has 1150K logic elements and fast transceivers.
40G networking
A QSFP+ cage supports 10 GbE and 40 GbE.
Board management
A BMC handles monitoring, flash and clock programming, updates and IPMI.
Precision timing
A 20 MHz 0.05 ppm oscillator and a PPS coax connector support IEEE 1588 PTP.
Expansion ports
A Samtec LSHM port carries 10 transceivers, plus a 10-pin GPIO and SPI connector.
Server friendly
Single-slot passive cooling fits standard servers, and USB Blaster is onboard.
Specifications
- FPGA
- Intel Arria 10 GX 10AX115N2F40I1SG, 1150 KLE
- Host interface
- PCIe Gen3 x8
- Network
- QSFP+ cage, 4 lanes at 10.3125 Gbps, 10/40 GbE
- Memory
- 8 GB DDR4 x72 with ECC, up to 2400 MT/s
- Configuration
- NOR flash AS mode with fail-safe sector, configuration via protocol (CvP)
- Expansion
- 10 transceivers on Samtec LSHM, 10 LVCMOS GPIO, SPI
- Clock
- Si5341 PLL, 20 MHz 0.05 ppm oscillator, PPS coax
- Management
- BMC with IPMI, onboard USB Blaster
- Cooling
- Single-slot passive heatsink
- Power
- 80 W max, external 12 V auxiliary connector
- Operating temp
- 0 to 70 C
- Dimensions
- 167.7 x 68.9 mm, low profile
- Software
- SDK for Windows 10 64-bit and Linux Debian Stretch 64-bit
Models and options
- XpressGXA10-LP1151B (Basic): Arria 10 GX 10AX115N2F40I1SG, 8 GB DDR4
Specifications as published by Reflex CES. Configurations vary by model; we will confirm the exact build with your quote.
More in pcie boards
All Reflex CES products
XpressSX AGI-FH401G
PCIe Gen5 board with an Agilex 7 I-Series SoC FPGA and 400G Ethernet, aimed at SmartNIC designs.
- Agilex 7 I-Series
- PCIe Gen5 x16
- 400GbE
- Up to 72 GB DDR4
- CXL EP capable
XpressGX S10-FH800G
Full-height Stratix 10 GX PCIe board with four QSFP-DD cages, for up to 800G Ethernet.
- Stratix 10 GX 2800
- PCIe Gen3 x16
- 4x QSFP-DD
- DDR4 or QDRII+
- Up to 800 GbE
XpressVUP-LP9PT3
Low-profile PCIe board with a -3 speed grade Virtex UltraScale+ VU9P, built for HFT and ultra-low latency.
- Virtex US+ VU9P-3
- PCIe Gen3 x16
- 2x QSFP28
- DDR4 + QDR2+
- Low profile
XpressVUP-LP5/9PT2
Low-profile, single-slot PCIe board with a Virtex UltraScale+ VU5P or VU9P and two QSFP28 cages.
- VU5P or VU9P
- PCIe Gen3 x16
- 2x QSFP28
- 100 W max
- Single slot
XpressVUP-LP9PI
Low-profile Virtex UltraScale+ VU9P PCIe board on a conduction-cooled heat spreader, for fanless industrial and defence systems.
- Virtex US+ VU9P
- PCIe Gen3 x16
- 2x QSFP28
- Conduction cooled
- -40 to 70 C
XpressVUP-LP9PI2
Fanless, industrial-temperature PCIe board with a Virtex UltraScale+ VU9P for rugged and defence systems.
- Virtex US+ VU9P
- PCIe Gen3 x16
- -40 to 70 C
- 16 GB DDR4
- Fanless
Need help choosing?
Tell us your application. We will recommend the right Reflex CES product, quote it and support it after delivery.