Aceinna · Inertial systems
IMU383ZA
Embedded 6-DOF IMU with triple-redundant sensors, a drop-in upgrade for the IMU380ZA and IMU381ZA.
- 6-DOF embedded IMU
- 1.3 deg/hr gyro bias
- SPI or UART
- < 250 mW

Overview
The IMU383ZA is a factory-calibrated 6-DOF inertial measurement unit in a miniature die-cast aluminum module. It is a pin-compatible replacement for the IMU380ZA and IMU381ZA that adds a fault-tolerant triple-redundant sensor architecture, advanced synchronization and a bootloader for field upgrades. It connects over SPI or UART for board-to-board integration.
Built for
- Precision farming
- Unmanned vehicle control
- Platform stabilization
- Robotics and drones
Key features
Triple-redundant sensors
Fault-tolerant 3x redundant MEMS sensors for higher reliability.
Drop-in upgrade
Hardware and software compatible with the IMU380ZA and IMU381ZA.
Clock synchronization
Accepts a 1 kHz sync pulse input.
Field upgradable
Built-in bootloader for firmware updates in the field.
Configurable output
Output data rate from 1 to 200 Hz over SPI or UART.
NAV-VIEW support
The evaluation kit works with NAV-VIEW software to display, record and configure the unit.
Specifications
- Degrees of freedom
- 6
- Gyro range
- +/-400 deg/s
- Gyro bias instability
- 1.3 deg/hr
- Angle random walk
- 0.08 deg/√hr
- Gyro bias over temperature
- < 0.5 deg/s
- Accel range
- +/-8 g
- Accel bias instability
- 0.015 mg
- Bandwidth
- 5 to 50 Hz, configurable
- Output data rate
- 1 to 200 Hz
- Interface
- SPI or UART
- Connector
- 20-pin (10 x 2) 1.0 mm pitch header
- Input voltage
- 3.0 to 5.5 VDC
- Power
- < 250 mW
- Operating temperature
- -40 to 85 C
- Size
- 24.15 x 37.7 x 9.5 mm
- Weight
- < 17 g
Models and options
- IMU383ZA-400 (6 DOF, 400 deg/s range)
- IMU383ZA-400 EVK (evaluation kit)
Specifications as published by Aceinna. Configurations vary by model, so we will confirm the exact build with your quote.
Buying the IMU383ZA in India
Authorised Aceinna distributor
Genuine Aceinna products, sourced directly from Aceinna.
GST invoice
Invoiced in India with GST, so registered businesses can claim input tax credit.
From stock or to order
Some products ship from our stock in India, and we order the rest from Aceinna for you.
Help choosing
Tell us the application and we will recommend the right Aceinna product.
More in inertial systems
All Aceinna products
OpenIMU330B
Triple-redundant 6-DOF surface mount IMU that runs the OpenIMU open source navigation stack.
- Triple-redundant 6-DOF
- 1.5 deg/hr gyro bias
- SPI / UART
- 11 x 15 x 3.4 mm BGA

OpenIMU335RI
Rugged, sealed triple-redundant open source IMU with CAN and RS232 for off-road and vehicle use.
- 6-DOF (9-DOF option)
- 1.3 deg/hr gyro bias
- CAN J1939 / RS232
- IP67 / IP69K

IMU330RA
ASIL B automotive 6-DOF IMU in an IP69K housing with 1000Base-T1 Ethernet and CAN-FD.
- ASIL B, AEC-Q104
- 1000Base-T1 / CAN-FD
- 1 deg/hr gyro bias
- IP69K sealed

MTLT335D
Triple-redundant dynamic tilt sensor and 6-DOF IMU with CAN J1939, developed to ISO 13849 up to PL d.
- Triple-redundant 6-DOF
- ISO 13849 PL d
- CAN J1939 / RS232
- IP69K, 9 to 32 V

MTLT305E
Cost-effective 6-DOF IMU and dynamic tilt sensor with CAN J1939, software compatible with the MTLT335D.
- 0.15 deg static tilt
- 4 deg/hr gyro bias
- CAN J1939 / RS232
- IP69K, 9 to 32 V

INS401
Automotive GNSS/INS with an RTK receiver and triple-redundant IMU for cm-level positioning.
- RTK 2 cm (RMS)
- Multi-band GNSS
- 100 Hz INS output
- Ethernet, 1PPS
Need help choosing?
Tell us your application. We will recommend the right Aceinna product, quote it and support it after delivery.