Memsic
6 axis IMU
3 axis gyroscope plus 3 axis accelerometer with large FIFO, I2C, I3C and SPI, output to 2,200 Hz.
- MIC6102AL
Overview
Memsic's 6-axis IMU combines a 3-axis gyroscope and a 3-axis accelerometer in one package for motion sensing. Memsic aims it at interactive systems such as game controllers and smart remote controls, and says its algorithm team can support customer applications. The MIC6102AL has a large FIFO, I2C, I3C and SPI interfaces, and data output up to 2200 Hz.
Built for
- Game controllers
- Smart remote controls
- Motion-sensing interactive devices
Key features
Gyro plus accelerometer
Integrates a 3-axis gyroscope and a 3-axis accelerometer in one package.
Large FIFO
A large on-chip FIFO buffers samples to reduce host processor load.
Three interfaces
Supports I2C, I3C and SPI communication.
High output rate
Data output frequency is up to 2200 Hz.
Compact LGA
Packaged in a 2.5 x 3 x 0.83 mm LGA.
Algorithm support
Memsic offers algorithm support for different application scenarios.
Specifications
- Axes
- 6 (3-axis gyro, 3-axis accel)
- Interface
- I2C, I3C, SPI
- Max data output
- 2200 Hz
- FIFO
- Large FIFO (size not stated)
- Package
- LGA 2.5 x 3 x 0.83 mm
- Part
- MIC6102AL
Part number
| Part | Axes | Gyro range | Accel range | Interface | Max output rate | Package | Notes |
|---|---|---|---|---|---|---|---|
| MIC6102AL | 6 (3-axis gyro, 3-axis accel) | I2C, I3C, SPI | 2200 Hz | LGA 2.5 x 3 x 0.83 mm | Large FIFO |
Specifications as published by Memsic. Configurations vary by model; we will confirm the exact build with your quote.
More from Memsic
All Memsic products
AMR magnetometer
Higher accuracy to 1°, low noise and low temperature drift. SET and RESET coils degauss without frequent recalibration.
- MMC5616WA-E
- MMC5983MA
- MMC5603NJ
- +3 more
Thermal accelerometer
A gas mass instead of a moving one: passes every drop test, ignores high frequency vibration, and holds its zero g offset through SMT.
- MXC4005XC
- MXC6655XA
- MXR7150VW
- +4 more
Capacitive accelerometer
Monolithic CMOS design in packages from 1.6 x 1.6 mm, with sniff and ultra low power wake modes.
- MXC3638AL
- MXC3500AL
- MC3419
- +5 more
Hall switch
2.5 µA typical, 1.65 to 5.5 V, DFN4 package at 1.0 x 1.4 mm. Unipolar and omnipolar outputs.
- MHA100KN
- MHA182AS-S
- MHA183AS
eOIS controller
One chip optical image stabilisation driver: linear Hall sensor, H bridge and PID in a 6 pin WL-CSP.
- MSD4100WA
Need help choosing?
Tell us your application. We will recommend the right Memsic product, quote it and support it after delivery.