Memsic
AMR magnetometer
Higher accuracy to 1°, low noise and low temperature drift. SET and RESET coils degauss without frequent recalibration.
- MMC5616WA-E
- MMC5983MA
- MMC5603NJ
- +3 more

Overview
Memsic's magnetometers are 3-axis sensors based on anisotropic magnetoresistive (AMR) technology. Compared with Hall-based magnetometers, AMR gives higher accuracy, lower noise and lower temperature drift. A built-in SET/RESET function degausses the sensor and removes temperature-induced offset, so the sensor needs less frequent recalibration after exposure to strong magnets.
Built for
- Electronic compass and navigation
- Smartphones, tablets and wearables
- Position sensing
- General magnetic field measurement
Key features
AMR sensing
Magnetoresistive sensing offers a high signal-to-noise ratio and low temperature drift compared with Hall-based magnetometers.
SET/RESET degaussing
Built-in SET/RESET clears residual magnetization from strong external fields and cancels thermal offset.
Heading accuracy
Parts are specified for heading accuracy of about 1°, and the MMC5983MA is specified for 0.5°.
Wafer level packages
The smallest parts come in WLP packages of about 0.8 x 0.8 x 0.4 mm.
I2C, I3C and SPI
All parts have I2C, with I3C on the MMC5616WA-E and MMC5633NJL and SPI on the MMC5983MA.
On-chip compensation
Parts include on-chip sensitivity compensation, and most include a temperature sensor.
Specifications
- Technology
- AMR (anisotropic magnetoresistive)
- Axes
- 3
- Full scale range
- ±8 G to ±30 G, by part
- Resolution
- Up to 20-bit, 0.0625 mG/LSB
- RMS noise
- 0.4 to 2 mG, by part
- Heading accuracy
- 0.5° to 1°, by part
- Interface
- I2C, plus I3C or SPI on some parts
- Supply
- 1.62 to 3.6 V on most parts
- Power down current
- 1 µA
- Smallest package
- 0.8 x 0.8 x 0.4 mm WLP
- Degaussing
- Built-in SET/RESET
Part numbers (link to datasheets)
| Part | Range | Resolution | RMS noise | Heading accuracy | Max rate | Interface | Package | Supply | Notes |
|---|---|---|---|---|---|---|---|---|---|
| MMC5616WA-E | ±30 G | 20-bit, 0.0625 mG/LSB | 2 mG | ±1° | 1 kHz sensor response | I2C, I3C | WLP 0.82 x 0.82 x 0.4 mm | 1.7 to 3.6 V | 16 x 16-bit FIFO, automatic degaussing |
| MMC5983MA | ±8 G | 18-bit | 0.4 mG | 0.5° | 1000 Hz ODR | I2C, SPI | LGA 3.0 x 3.0 x 1.0 mm | 3.0 V | Automotive grade |
| MMC3416xPJ | ±16 G | 16/14-bit, 0.5/2 mG/LSB | 1.5 mG | ±1° | 800 Hz ODR (12-bit mode) | I2C | BGA 1.6 x 1.6 x 0.6 mm | 1.62 to 3.6 V | Multiple I2C addresses, 140 µA at 7 Hz |
| MMC3630KJ | ±30 G | 16-bit, 1 mG/LSB | 2 mG | 1° | 600 Hz ODR | I2C | BGA 1.2 x 1.2 x 0.5 mm | 1.8 V | Motion detection interrupt |
| MMC5603NJ | ±30 G | 20-bit, 0.0625 mG/LSB | 2 mG | 1° | 1 kHz sensor response | I2C | WLP 0.8 x 0.8 x 0.4 mm | 1.62 to 3.6 V | Automatic degaussing, self-test |
| MMC5633NJL | ±30 G | 20-bit, 0.0625 mG/LSB | 2 mG | ±1° | 1 kHz sensor response | I2C, I3C | WLP 0.8 x 0.8 x 0.4 mm | 1.62 to 3.6 V | Automatic degaussing, self-test |
Specifications as published by Memsic. Configurations vary by model, so we will confirm the exact build with your quote.
Buying the AMR magnetometer in India
Authorised Memsic distributor
Genuine Memsic products, sourced directly from Memsic.
GST invoice
Invoiced in India with GST, so registered businesses can claim input tax credit.
From stock or to order
Some products ship from our stock in India, and we order the rest from Memsic for you.
Help choosing
Tell us the application and we will recommend the right Memsic product.
More from Memsic
All Memsic products
Thermal accelerometer
A gas mass instead of a moving one: Passes every drop test, ignores high frequency vibration, and holds its zero g offset through SMT.
- MXC4005XC
- MXC6655XA
- MXR7150VW
- +4 more

Capacitive accelerometer
Monolithic CMOS design in packages from 1.6 x 1.6 mm, with sniff and ultra low power wake modes.
- MXC3638AL
- MXC3500AL
- MC3419
- +5 more

Hall switch
2.5 µA typical, 1.65 to 5.5 V, DFN4 package at 1.0 x 1.4 mm. Unipolar and omnipolar outputs.
- MHA100KN
- MHA182AS-S
- MHA183AS

6 axis IMU
3 axis gyroscope plus 3 axis accelerometer with large FIFO, I2C, I3C and SPI, output to 2,200 Hz.
- MIC6102AL

eOIS controller
One chip optical image stabilisation driver: Linear Hall sensor, H bridge and PID in a 6 pin WL-CSP.
- MSD4100WA
Need help choosing?
Tell us your application. We will recommend the right Memsic product, quote it and support it after delivery.