Memsic
eOIS controller
One chip optical image stabilisation driver: Linear Hall sensor, H bridge and PID in a 6 pin WL-CSP.
- MSD4100WA

Overview
The MSD4100WA is Memsic's single-chip driver for optical image stabilisation in voice coil motor (VCM) camera modules. It combines a linear Hall effect sensor, an H-bridge drive circuit and a PID control algorithm, and supports offset, sensitivity and linearity compensation. It comes in a 6-pin WL-CSP for mobile camera modules.
Built for
- Smartphone camera modules
- VCM image stabilisation
- Compact mobile cameras
Key features
One-chip solution
Integrates the Hall sensor, driver and PID control for a VCM in one IC.
Silicon Hall sensor
A low-noise linear Hall sensor with a 16-bit ADC measures lens position.
Constant current driver
A 1-channel, 11-bit linear driver supplies up to 170 mA.
Built-in compensation
Supports offset, sensitivity and linearity compensation.
Fast I2C and I3C
I2C runs up to 3.4 MHz high-speed mode and I3C up to 12.5 MHz.
Tiny package
Packaged in a 6-pin WL-CSP of 0.63 x 2.37 x 0.315 mm typical.
Specifications
- Function
- eOIS driver IC for VCM
- VDD
- 2.65 to 3.6 V
- IO voltage
- 1.2 to 3.6 V
- I2C
- Fast, Fast Plus, HS (3.4 MHz)
- I3C
- Up to 12.5 MHz
- Hall sensor
- Si-based, 16-bit ADC
- Control signal
- 13-bit
- Driver
- 1-ch, 11-bit, 170 mA max
- Package
- 6-pin WL-CSP, 0.63 x 2.37 x 0.315 mm
Part number
| Part | Sensor | Driver | Interface | Supply | Package | Notes |
|---|---|---|---|---|---|---|
| MSD4100WA | Si Hall, 16-bit ADC | 1-ch, 11-bit, 170 mA | I2C (to 3.4 MHz), I3C (to 12.5 MHz) | VDD 2.65 to 3.6 V, IO 1.2 to 3.6 V | 6-pin WL-CSP 0.63 x 2.37 x 0.315 mm | User-selectable I2C address |
Specifications as published by Memsic. Configurations vary by model, so we will confirm the exact build with your quote.
Buying the eOIS controller in India
Authorised Memsic distributor
Genuine Memsic products, sourced directly from Memsic.
GST invoice
Invoiced in India with GST, so registered businesses can claim input tax credit.
From stock or to order
Some products ship from our stock in India, and we order the rest from Memsic for you.
Help choosing
Tell us the application and we will recommend the right Memsic product.
More from Memsic
All Memsic products
AMR magnetometer
Higher accuracy to 1°, low noise and low temperature drift. SET and RESET coils degauss without frequent recalibration.
- MMC5616WA-E
- MMC5983MA
- MMC5603NJ
- +3 more

Thermal accelerometer
A gas mass instead of a moving one: Passes every drop test, ignores high frequency vibration, and holds its zero g offset through SMT.
- MXC4005XC
- MXC6655XA
- MXR7150VW
- +4 more

Capacitive accelerometer
Monolithic CMOS design in packages from 1.6 x 1.6 mm, with sniff and ultra low power wake modes.
- MXC3638AL
- MXC3500AL
- MC3419
- +5 more

Hall switch
2.5 µA typical, 1.65 to 5.5 V, DFN4 package at 1.0 x 1.4 mm. Unipolar and omnipolar outputs.
- MHA100KN
- MHA182AS-S
- MHA183AS

6 axis IMU
3 axis gyroscope plus 3 axis accelerometer with large FIFO, I2C, I3C and SPI, output to 2,200 Hz.
- MIC6102AL
Need help choosing?
Tell us your application. We will recommend the right Memsic product, quote it and support it after delivery.